Addressable Heat Detectors
Addressable Heat Detectors combine the reliability of thermal detection with the precision of addressing. They transmit actual temperature to the panel continuously, not just an on/off state, allowing graded alarms and trend monitoring. Ideal for sites with normal smoke where precise location is needed.
(0 products)
About this category
Addressable heat detectors advance thermal detection from a binary signal to continuous digital data. The design: a ceiling device holding a sensitive thermistor (faster response than the older bimetal), an electronic processor with a unique address, and a digital communication circuit. Operating modes: fixed temperature (panel-programmable 54-93°C), rate-of-rise, combination, and analog reporting (actual temperature streamed to the panel every second). Unique advantage: the panel sees the real temperature curve, generates a pre-alarm at a programmable fraction of the threshold, and flags gradual temperature rise earlier than fixed-threshold conventional detectors. Detectors are classified under EN 54-5 from A1 to G by application temperature and response range; take the values from the standard and the model documents. Electrical principle: on the same SLC. Applications: large hotel kitchens (ahead of hood suppression), parking in large buildings, industry with steam or smoke, maintenance workshops, printing, welding areas, and dusty warehouses. A difference from conventional heat: addressable is more precise and provides analytics; conventional is a simple binary signal. A difference from addressable smoke: heat does not activate on ordinary smoke; smoke is faster on smoldering fires. A technical note: temperature class is chosen based on normal ambient at the site plus 10-15°. Maintenance: annual heat-gun test, automated panel reporting of lagging detectors.
Read moreHide details
Addressable heat detectors advance thermal detection from a binary signal to continuous digital data. The design: a ceiling device holding a sensitive thermistor (faster response than the older bimetal), an electronic processor with a unique address, and a digital communication circuit. Operating modes: fixed temperature (panel-programmable 54-93°C), rate-of-rise, combination, and analog reporting (actual temperature streamed to the panel every second). Unique advantage: the panel sees the real temperature curve, generates a pre-alarm at a programmable fraction of the threshold, and flags gradual temperature rise earlier than fixed-threshold conventional detectors. Detectors are classified under EN 54-5 from A1 to G by application temperature and response range; take the values from the standard and the model documents. Electrical principle: on the same SLC. Applications: large hotel kitchens (ahead of hood suppression), parking in large buildings, industry with steam or smoke, maintenance workshops, printing, welding areas, and dusty warehouses. A difference from conventional heat: addressable is more precise and provides analytics; conventional is a simple binary signal. A difference from addressable smoke: heat does not activate on ordinary smoke; smoke is faster on smoldering fires. A technical note: temperature class is chosen based on normal ambient at the site plus 10-15°. Maintenance: annual heat-gun test, automated panel reporting of lagging detectors.
No products in this category yet
No products in this category yet
Browse the similar categories, or request a quote for what you need and we will source it.