Conventional Smoke Detectors
Conventional Smoke Detectors are zone-based detection devices, grouped on a single loop and located by zone rather than by individual device. They differ from addressable detectors by their simpler architecture, but they cannot identify which specific device triggered the alarm within the zone. They suit small and medium buildings.
(0 products)
About this category
Conventional smoke detectors are the economic solution for small and medium buildings. The design: a small ceiling-mounted device holding a smoke chamber, simple electronics, and a wiring base. Detection technologies: photoelectric (optical, sensitive to smoke from smoldering fires such as plastic and furniture), ionization (sensitive to fine smoke from fast-flaming fires such as paper), and combination (both techniques). Electrical principle: 15-25 detectors on one loop in parallel with an end-of-line resistor; when any detector operates, loop resistance changes and the control panel senses it. Sensitivity levels vary between models to suit sensitive rooms or sites with routine dust, and the level is selected to suit the install environment. Applications: small residential buildings, retail shops, small schools, offices, and warehouses. A key advantage: typically lower cost than addressable, with simpler install and maintenance. A technical note: conventional detectors do not identify the triggering device; only the zone is located, after which all detectors in the zone must be checked to find the fire source. A substantive difference from addressable: addressable identifies the device precisely and carries maintenance-status data, while conventional is simpler and cheaper. Maintenance: monthly visual check, annual chamber cleaning, replacement every 10 years. Model-level approvals and local requirements should be verified when specifying.
Read moreHide details
Conventional smoke detectors are the economic solution for small and medium buildings. The design: a small ceiling-mounted device holding a smoke chamber, simple electronics, and a wiring base. Detection technologies: photoelectric (optical, sensitive to smoke from smoldering fires such as plastic and furniture), ionization (sensitive to fine smoke from fast-flaming fires such as paper), and combination (both techniques). Electrical principle: 15-25 detectors on one loop in parallel with an end-of-line resistor; when any detector operates, loop resistance changes and the control panel senses it. Sensitivity levels vary between models to suit sensitive rooms or sites with routine dust, and the level is selected to suit the install environment. Applications: small residential buildings, retail shops, small schools, offices, and warehouses. A key advantage: typically lower cost than addressable, with simpler install and maintenance. A technical note: conventional detectors do not identify the triggering device; only the zone is located, after which all detectors in the zone must be checked to find the fire source. A substantive difference from addressable: addressable identifies the device precisely and carries maintenance-status data, while conventional is simpler and cheaper. Maintenance: monthly visual check, annual chamber cleaning, replacement every 10 years. Model-level approvals and local requirements should be verified when specifying.
No products in this category yet
No products in this category yet
Browse the similar categories, or request a quote for what you need and we will source it.