Face Shields
Face Shields provide full-face protection against sparks, flying debris, chemical splash, and molten metal. They are always worn over safety glasses or goggles and never used alone as a substitute for primary eye protection. Models differ in material (polycarbonate, acetate), thickness, and mounting (headgear or helmet-mount). Arc-rated face shields are listed under Electrical PPE and welding shields under Welding Shields.
(0 products)
About this category
A face shield is not a substitute for eye protection but a complement; ANSI Z87.1 approval alone is insufficient — a safety glass or goggle must be worn underneath. Shield material and thickness drive the protection type: polycarbonate (0.75-2 mm) delivers high impact resistance to high-energy particles, while acetate (1-2 mm) offers higher chemical resistance with lower impact resistance. Molten metal shields are specifically rated for that hazard (e.g. marking 9 under EN 166) and serve steel and casting plants. Chemical splash shields carry a resistant coating and extend below the chin. Welding shields with a defined shade filter differ from general-purpose face shields. Mounting differs: an adjustable headgear with flip-up mechanism allows raising the shield when not needed, or direct mounting on a safety helmet via side clips. Selection considers shield height (full face or full chest), lens clarity, optical distortion index, and anti-fog performance. Common uses include grinding, sanding, metal pouring, chemical handling, and woodworking. Arc-rated face shields (under Electrical Safety & Testing → Electrical PPE) and welding shields (under Welding Shields) are excluded from this category. Specifications follow ANSI Z87.1 and EN 166 by model.
Read moreHide details
A face shield is not a substitute for eye protection but a complement; ANSI Z87.1 approval alone is insufficient — a safety glass or goggle must be worn underneath. Shield material and thickness drive the protection type: polycarbonate (0.75-2 mm) delivers high impact resistance to high-energy particles, while acetate (1-2 mm) offers higher chemical resistance with lower impact resistance. Molten metal shields are specifically rated for that hazard (e.g. marking 9 under EN 166) and serve steel and casting plants. Chemical splash shields carry a resistant coating and extend below the chin. Welding shields with a defined shade filter differ from general-purpose face shields. Mounting differs: an adjustable headgear with flip-up mechanism allows raising the shield when not needed, or direct mounting on a safety helmet via side clips. Selection considers shield height (full face or full chest), lens clarity, optical distortion index, and anti-fog performance. Common uses include grinding, sanding, metal pouring, chemical handling, and woodworking. Arc-rated face shields (under Electrical Safety & Testing → Electrical PPE) and welding shields (under Welding Shields) are excluded from this category. Specifications follow ANSI Z87.1 and EN 166 by model.
No products in this category yet
No products in this category yet
Browse the similar categories, or request a quote for what you need and we will source it.