Calibration Equipment
Calibration equipment ensures the accuracy of gas detector readings. Sensors drift over time, and an uncalibrated instrument cannot be trusted. The category includes certified calibration gas cylinders, automatic calibration stations, bump test equipment, and flow regulators. A documented calibration program is a core requirement for facilities that rely on gas detection, per manufacturer instructions and applicable regulations.
(0 products)
About this category
Calibration gas cylinders differ by gas species, concentration, and shelf life. A cylinder typically contains a defined gas mix at defined span concentrations within the measuring range (such as 50% LEL methane or 25 ppm H2S) and carries a certification label from an accredited laboratory. Automatic calibration stations are docking cradles for portable detectors that run daily bump tests and quarterly calibration cycles without intervention and record results to a database. Bump test equipment applies a small amount of gas to the sensor to verify response (without actually recalibrating the sensor) and is used daily before shift start. Flow regulators connect the cylinder to the detector and set the correct flow rate (typically 0.5 L/min). Calibration frequency varies with gas type, operating environment, and the sensitivity required for a given application. Adherence to a documented calibration program protects workers from relying on inaccurate readings caused by gradual sensor drift. Sensors are calibrated per the manufacturer's instructions (often every 3-6 months depending on gas and environment), with daily bump tests and an auditable calibration record. Specifications follow ISA 92 and EN 60079-29. Cylinder shelf life varies (typically 1-2 years).
Read moreHide details
Calibration gas cylinders differ by gas species, concentration, and shelf life. A cylinder typically contains a defined gas mix at defined span concentrations within the measuring range (such as 50% LEL methane or 25 ppm H2S) and carries a certification label from an accredited laboratory. Automatic calibration stations are docking cradles for portable detectors that run daily bump tests and quarterly calibration cycles without intervention and record results to a database. Bump test equipment applies a small amount of gas to the sensor to verify response (without actually recalibrating the sensor) and is used daily before shift start. Flow regulators connect the cylinder to the detector and set the correct flow rate (typically 0.5 L/min). Calibration frequency varies with gas type, operating environment, and the sensitivity required for a given application. Adherence to a documented calibration program protects workers from relying on inaccurate readings caused by gradual sensor drift. Sensors are calibrated per the manufacturer's instructions (often every 3-6 months depending on gas and environment), with daily bump tests and an auditable calibration record. Specifications follow ISA 92 and EN 60079-29. Cylinder shelf life varies (typically 1-2 years).
All products in Calibration Equipment
No products in this category yet
No products in this category yet
Browse the similar categories, or request a quote for what you need and we will source it.