Measurement Tools
Measurement Tools provide the precision needed in fabrication, installation, and maintenance, differing in range, accuracy, and field of use. The category includes tape measures, laser distance meters, calipers, micrometers, levels, infrared thermometers, and torque wrenches. Selection follows required accuracy and the item being measured.
(0 products)
About this category
Fabrication accuracy starts with measurement accuracy. Common tape measures come in 3-10 m lengths with ±1 mm per 3 m accuracy, used in construction and logistics. Laser distance meters work from 0.05-100 m at ±1 mm and compute area and volume internally — far faster than a traditional tape. Vernier calipers measure external, internal, and depth dimensions to 0.02 mm and come in analog and digital versions. Micrometers measure to higher precision (0.001 mm) and serve precision parts manufacturing such as shafts and diameters. Spirit levels check horizontal and vertical alignment to 0.5-1 mm/m, with digital versions offering audible leveling alarm. Infrared thermometers measure surface temperature at distance (12:1 to 50:1 distance-to-spot ratio) and serve electrical panel and rotating equipment inspection. Torque wrenches apply a defined tightening torque calibrated to ±4-6%, with ranges from 0.5 N·m to 2000+ N·m — essential for critical fasteners such as engine and structural bolts. Scheduled calibration (typically annual) and pre-use inspection are mandatory. Specifications follow ISO 6789 for torque wrenches and ISO 3611 for micrometers.
Read moreHide details
Fabrication accuracy starts with measurement accuracy. Common tape measures come in 3-10 m lengths with ±1 mm per 3 m accuracy, used in construction and logistics. Laser distance meters work from 0.05-100 m at ±1 mm and compute area and volume internally — far faster than a traditional tape. Vernier calipers measure external, internal, and depth dimensions to 0.02 mm and come in analog and digital versions. Micrometers measure to higher precision (0.001 mm) and serve precision parts manufacturing such as shafts and diameters. Spirit levels check horizontal and vertical alignment to 0.5-1 mm/m, with digital versions offering audible leveling alarm. Infrared thermometers measure surface temperature at distance (12:1 to 50:1 distance-to-spot ratio) and serve electrical panel and rotating equipment inspection. Torque wrenches apply a defined tightening torque calibrated to ±4-6%, with ranges from 0.5 N·m to 2000+ N·m — essential for critical fasteners such as engine and structural bolts. Scheduled calibration (typically annual) and pre-use inspection are mandatory. Specifications follow ISO 6789 for torque wrenches and ISO 3611 for micrometers.
All products in Measurement Tools
No products in this category yet
No products in this category yet
Browse the similar categories, or request a quote for what you need and we will source it.