Lifeline Systems
Lifeline Systems are ropes or cables stretched between two or more anchor points, letting the worker move along a defined path while staying connected to the fall-protection system. The category covers horizontal lifelines for roofs and long structures, vertical lifelines for ascent and descent, overhead lifelines for industrial work, and integrated lifeline shock absorbers.
(0 products)
About this category
Lifeline systems differ by permissible path length, protection level, and installation style. Horizontal lifelines serve large roofs and inspection and maintenance walkways, installed between end anchors with a cable or rope under tension. Temporary HLLs differ from permanent HLLs in that permanent systems include intermediate anchors; both need an approved design or selection that checks loads, clearance and number of users. Vertical lifelines serve ascent and descent on ladders and structures and work with a moving rope grab that locks on fall. Overhead lifelines are mounted above the work area for three-dimensional movement and are used in vehicle and tank maintenance. Integrated lifeline shock absorbers soak up fall energy at the moment of the event and protect the building structure from impact loads. System selection considers the permitted number of simultaneously connected workers, cable sag, and total fall clearance. Cable angle, the allowable load per connected worker, and annual inspection by a certified technician must also be considered. Specifications follow ANSI Z359.6 and EN 795 Type C/D.
Read moreHide details
Lifeline systems differ by permissible path length, protection level, and installation style. Horizontal lifelines serve large roofs and inspection and maintenance walkways, installed between end anchors with a cable or rope under tension. Temporary HLLs differ from permanent HLLs in that permanent systems include intermediate anchors; both need an approved design or selection that checks loads, clearance and number of users. Vertical lifelines serve ascent and descent on ladders and structures and work with a moving rope grab that locks on fall. Overhead lifelines are mounted above the work area for three-dimensional movement and are used in vehicle and tank maintenance. Integrated lifeline shock absorbers soak up fall energy at the moment of the event and protect the building structure from impact loads. System selection considers the permitted number of simultaneously connected workers, cable sag, and total fall clearance. Cable angle, the allowable load per connected worker, and annual inspection by a certified technician must also be considered. Specifications follow ANSI Z359.6 and EN 795 Type C/D.
All products in Lifeline Systems
No products in this category yet
No products in this category yet
Browse the similar categories, or request a quote for what you need and we will source it.