Electrical Test Equipment
Electrical Testing instruments measure voltage, current, and resistance and verify circuit safety before work begins. The category includes digital multimeters, clamp meters for current measurement without breaking the circuit, insulation testers (Megger), earth/ground testers, contact and non-contact voltage detectors, and Portable Appliance Testers (PAT). Safety categories CAT II/III/IV differ by the measurement point in the system.
(0 products)
About this category
Safe electrical work does not begin until the absence of voltage is verified with an approved tester. Digital multimeters measure voltage, current, resistance, capacitance, and frequency in one unit and are classified under IEC 61010 (Part 2-030) by measurement category: CAT II for home outlets, CAT III for industrial distribution, CAT IV for the main service entrance. Clamp meters have a split jaw that encircles a conductor and measures current via a current transformer (AC) or a Hall-effect sensor (AC/DC) without breaking the circuit, with ranges up to 1000-2500 A. Insulation testers (Megger) generate a high test voltage (500, 1000, 2500, or 5000 V) and measure resistance between conductors — essential for scheduled cable, motor, and transformer testing. Earth/ground testers measure the system's ground resistance (compared against the limit set by the applicable code or site specification, e.g. 25 Ω for a single rod electrode under the NEC and far lower values at substations) using three-point or clamp methods. Contact voltage testers need conductor contact to indicate voltage; non-contact detectors sense the electric field of a live conductor without contact. PAT testers verify portable appliance safety before issue. Instruments are calibrated periodically per manufacturer guidance and the applicable quality system (typically annually). Specifications follow IEC 61010 and IEC 61557.
Read moreHide details
Safe electrical work does not begin until the absence of voltage is verified with an approved tester. Digital multimeters measure voltage, current, resistance, capacitance, and frequency in one unit and are classified under IEC 61010 (Part 2-030) by measurement category: CAT II for home outlets, CAT III for industrial distribution, CAT IV for the main service entrance. Clamp meters have a split jaw that encircles a conductor and measures current via a current transformer (AC) or a Hall-effect sensor (AC/DC) without breaking the circuit, with ranges up to 1000-2500 A. Insulation testers (Megger) generate a high test voltage (500, 1000, 2500, or 5000 V) and measure resistance between conductors — essential for scheduled cable, motor, and transformer testing. Earth/ground testers measure the system's ground resistance (compared against the limit set by the applicable code or site specification, e.g. 25 Ω for a single rod electrode under the NEC and far lower values at substations) using three-point or clamp methods. Contact voltage testers need conductor contact to indicate voltage; non-contact detectors sense the electric field of a live conductor without contact. PAT testers verify portable appliance safety before issue. Instruments are calibrated periodically per manufacturer guidance and the applicable quality system (typically annually). Specifications follow IEC 61010 and IEC 61557.
All products in Electrical Test Equipment
No products in this category yet
No products in this category yet
Browse the similar categories, or request a quote for what you need and we will source it.