Absorbents
Absorbents are the functional core of spill control, varying in form, base material, and pickup capacity. The category includes flat pads, tubular socks, large pillows, bulk rolls, granular media, and loose absorbents. Selection starts from liquid type: oil-only (repels water), chemical (resistant to acids and bases), or universal (absorbs common compatible liquids, including water, per the manufacturer's guide; incompatible chemicals are excluded).
(0 products)
About this category
Absorbent performance depends on the base polymer and relative pickup capacity. Meltblown polypropylene is the most common pad material because it picks up oil and repels water — used for spills on water or wet surfaces. Flat pads capture small to moderate surface spills and sit under leaking equipment. Tubular socks surround a spill to stop lateral spread and are placed at drain edges and doorways. Large pillows carry a granular fill with high capacity for larger volumes. Wide-format rolls lay flat in continuous-maintenance areas. Granular media (perlite, clay, cellulose fibers, polypropylene granules) spread over irregular spills to make later recovery easier. Performance is quantified as the ratio of captured liquid weight to dry weight — up to 20× for some synthetics. Selection considers material thickness for tear resistance, safe disposal after use, and chemical compatibility with the released liquid. Specialty products reference ASTM F726 for absorbency performance.
Read moreHide details
Absorbent performance depends on the base polymer and relative pickup capacity. Meltblown polypropylene is the most common pad material because it picks up oil and repels water — used for spills on water or wet surfaces. Flat pads capture small to moderate surface spills and sit under leaking equipment. Tubular socks surround a spill to stop lateral spread and are placed at drain edges and doorways. Large pillows carry a granular fill with high capacity for larger volumes. Wide-format rolls lay flat in continuous-maintenance areas. Granular media (perlite, clay, cellulose fibers, polypropylene granules) spread over irregular spills to make later recovery easier. Performance is quantified as the ratio of captured liquid weight to dry weight — up to 20× for some synthetics. Selection considers material thickness for tear resistance, safe disposal after use, and chemical compatibility with the released liquid. Specialty products reference ASTM F726 for absorbency performance.
All products in Absorbents
No products in this category yet
No products in this category yet
Browse the similar categories, or request a quote for what you need and we will source it.