Protective Clothing
Protective Clothing covers coveralls, vests, sleeves, and specialty garments that defend the body against varied hazards. The category spans high-visibility clothing, chemical protection coveralls, flame-resistant (FR) clothing, arc-flash suits, rainwear and waterproof garments, cold-weather clothing, disposable coveralls, protective aprons and sleeves, and cooling vests. Material and construction match thermal, chemical, and mechanical hazards.
(0 products)
About this category
High-visibility clothing uses fluorescent fabrics and retro-reflective tape to make the worker visible to vehicles; EN ISO 20471 rates garments Class 1-3 by surface area. Chemical coveralls are classified Type 1 (gas-tight) through Type 6 (light spray) based on the chemical phase and expected exposure. Flame-resistant (FR) clothing uses fibers such as Nomex, Modacrylic, or FR-treated cotton that self-extinguish when the flame source is removed; FR clothing should not be used for arc-flash protection unless it carries an appropriate arc rating. Arc-flash suits are rated in cal/cm² and selected against the facility's arc-flash study. Rainwear provides water penetration resistance with reasonable breathability for outdoor work. Cold-weather clothing is rated by insulation value (CLO). Disposable coveralls in polypropylene or Tyvek are used in light contamination or asbestos abatement. Aprons and sleeves protect specific body zones only. Cooling vests prevent heat stress in hot environments. Specifications follow EN ISO 20471 (high visibility), EN 14605, EN ISO 13982-1 and EN 13034 (chemical), EN ISO 11612 (heat and flame), IEC 61482-2 and NFPA 70E (arc flash), EN 343 (rain), EN 342 (cold), and EN 1149 (electrostatic properties).
Read moreHide details
High-visibility clothing uses fluorescent fabrics and retro-reflective tape to make the worker visible to vehicles; EN ISO 20471 rates garments Class 1-3 by surface area. Chemical coveralls are classified Type 1 (gas-tight) through Type 6 (light spray) based on the chemical phase and expected exposure. Flame-resistant (FR) clothing uses fibers such as Nomex, Modacrylic, or FR-treated cotton that self-extinguish when the flame source is removed; FR clothing should not be used for arc-flash protection unless it carries an appropriate arc rating. Arc-flash suits are rated in cal/cm² and selected against the facility's arc-flash study. Rainwear provides water penetration resistance with reasonable breathability for outdoor work. Cold-weather clothing is rated by insulation value (CLO). Disposable coveralls in polypropylene or Tyvek are used in light contamination or asbestos abatement. Aprons and sleeves protect specific body zones only. Cooling vests prevent heat stress in hot environments. Specifications follow EN ISO 20471 (high visibility), EN 14605, EN ISO 13982-1 and EN 13034 (chemical), EN ISO 11612 (heat and flame), IEC 61482-2 and NFPA 70E (arc flash), EN 343 (rain), EN 342 (cold), and EN 1149 (electrostatic properties).
All products in Protective Clothing
No products in this category yet
No products in this category yet
Browse the similar categories, or request a quote for what you need and we will source it.